SP Tinby · News archive
PUR and composite solutions for the wind turbine industry

The wind turbine industry places high demands on the materials and components used in modern wind turbines. Low weight, strength, durability and functionality are among the key properties to consider when developing components for demanding technical applications.
The choice of material depends on the function of the component and the requirements it needs to meet. In some applications, low weight is essential, while others require high strength, electrical insulation or specific design characteristics.
Polyurethane (PUR) and composites are two material types with different applications in the wind industry. At SP Tinby, we work with both materials, developing customised components based on the technical requirements of each individual solution.
Composites for strong and lightweight components
Composite materials are used in the wind turbine industry where there is a need to combine strength and stiffness with low weight.
Fibre-reinforced composites typically consist of glass or carbon fibres combined with a resin, such as epoxy or polyester. The fibres provide strength and stiffness, while the resin binds the material together to form the finished component.
Depending on the design and application, composites can be manufactured with different properties and in complex geometries. This offers considerable scope for developing components tailored to specific functions and loads.
SP Tinby works with several different composite manufacturing processes, including:
- Vacuum processes
- Injection
- RTM (Resin Transfer Moulding)
- Hand lay-up
The choice of manufacturing process depends, among other things, on the component's design, material requirements and production volume.
Polyurethane (PUR) for specialised wind turbine components
Polyurethane is a versatile material that can be manufactured with different properties depending on its composition and the manufacturing process used.
In the wind industry, PUR is used, for example, in components where low weight, electrical insulation, strength or wear resistance are important properties.
At SP Tinby, we work with applications including:
Lightweight cores for wind turbine blades
PUR 150 Energy has been developed for the production of lightweight cores for wind turbine blades. The material has a low density, is durable and can be moulded into complex shapes and varying wall thicknesses. Among other things, it can be used as an alternative to balsa wood.
Electrical insulation in lightning protection systems
PUR can be used for encapsulating and electrically insulating components in wind turbine lightning protection systems. Here, the material's electrical properties and its ability to surround and protect the components are essential.
Custom-moulded components
Using PUR moulding, SP Tinby can manufacture components with complex geometries, tailored to each customer's product and technical requirements. This provides considerable flexibility when developing components for different functions and performance requirements.
Material selection and design go hand in hand
When developing a new component, it is important to consider material selection, design and manufacturing as interconnected elements.
The component's function and the loads it will be exposed to influence the choice of material. At the same time, the design must be adapted to the material's properties and the manufacturing process to be used.
Factors that may need to be considered include:
- Mechanical loads and strength requirements
- Component weight and dimensions
- Electrical and insulating properties
- Geometrical design and tolerances
- Manufacturing process and requirements for consistent quality
By taking these factors into account at an early stage of the development process, it becomes easier to identify the right combination of material, design and manufacturing technology.
From technical requirements to finished components
Developing components for the wind industry often requires close collaboration between the customer and the manufacturer. This is particularly important when it comes to specialised components, where materials, geometry and functionality must be tailored to a specific application.
At SP Tinby, we can contribute with technical consultancy, material selection, design, tooling development and prototype manufacturing. The solution can then be optimised and prepared for series production.
We work with both PUR and composites, allowing us to approach each project based on its specific requirements rather than being limited to a single material type or manufacturing process.
This makes it possible to develop components in which the material properties and manufacturing process are matched to the requirements of the finished solution.
PUR and composites for the wind turbine industry at SP Tinby
SP Tinby has more than 50 years of experience with polyurethane and extensive expertise in composites. We develop and manufacture customised components for the wind industry, including PUR components for electrical insulation and lightweight cores, as well as moulded and pultruded composite components.
With specialised materials knowledge and experience in various manufacturing technologies, we help customers turn technical requirements into high-performance components.
Looking for a custom-developed component for the wind industry?
Contact SP Tinby to discuss the possibilities within polyurethane and composites.
Frequently asked questions about PUR and composites in the wind turbine industry
Which materials are used in the wind turbine industry?
Wind turbines consist of components made from various materials, including steel, aluminium, glass fibre-reinforced composites and polyurethane. The choice of material depends on the component's function and the technical requirements.
What are composites used for in wind turbines?
Fibre-reinforced composites are used, among other things, for components where high strength and stiffness combined with low weight are important properties. Glass and carbon fibres can be combined with different types of resin depending on the application.
How is PUR used in the wind turbine industry?
PUR is used, among other things, for lightweight cores in wind turbine blades, electrical insulation in lightning protection systems and custom-moulded components with specific technical properties.
What is the difference between PUR and composites?
PUR is a plastic material that can be manufactured with different properties, including varying levels of hardness, flexibility and insulation performance. Composites consist of several materials, such as glass fibres and resin, combined to achieve specific properties.
How do you choose the right material for a wind turbine component?
The choice of material depends on the component's function, loads, weight requirements, dimensions and other technical specifications. It is important to assess the material's properties in relation to the design, the intended manufacturing process and the final application.