Skip to main content
SP Tinby
Wind turbines in a landscape

Pultrusion

Strong, lightweight composite profiles

Pultrusion pulls fibres and resin through a heated die. This produces long profiles with a constant cross-section, high strength relative to weight and limited maintenance needs.

What is pultrusion?

Pultrusion is a continuous process for making fibre-reinforced profiles. Fibres are wetted with resin and pulled through a heated die, where the profile hardens. It is then cut to length. Unlike a moulded component, the profile keeps the same cross-section along its full length.

Benefits for your product

  • Strong, lightweight profiles

    Fibre type and direction can be selected to provide the strength and stiffness the profile needs at low weight.

  • Less maintenance in exposed environments

    A suitable fibre and resin system can withstand moisture, weather and corrosion without the maintenance associated with some conventional materials.

  • Supply a component, not just a length

    Profiles can be cut, drilled, bonded and assembled to suit the finished product.

Pultrusion

Composite profiles for the transportation, car, robot, wind, construction, sanitation and navy industries as well as e.g. environmental applications

Polyurethan (PUR) komponenter til vindmølleindustrien med høj styrke og bearbejdelighed

What is pultrusion?

Pultrusion is a process whereby thick fibres are pulled continuously through a tool, which ensures that the threads generate the geometric cross-section desired for that particular profile. The fibres are impregnated with a resin, which then undergoes a thermosetting process, creating a solid, shaped profile, which can subsequently be sawn off into the desired lengths. The profile can be shaped and optimized during several stages in the process, e.g. according to the attributes of the material, which are primarily regulated through the type and number of fibre threads used. To put it simple pultrusion can be described as woven and reinforced fibre threads that are shaped into the geometry and strengths, which you need. The production method ensures consistent quality, which can be reproduced.

NB! Combining different types of resin treated fibres allows us to design the finished profile in the exact strengths and stiffness you desire, regardless of whether these items are to be used within the transportation, car, wind, construction, sanitation or navy industries; or it could be used for something completely different.

Pultrudering proces med kontinuerlig trækningsfremstilling af fiberforstærkede kompositprofiler med høj styrke og lav vægt

What are the advantages of using pultrusion?

As the final pultruded product is made of a composite material, i.e. a combination of different materials, one of the primary and most important advantages is that the items produced are much stiffer and stronger in relation to their density - compared to a large number of other materials. In many cases, plastic composites can thus replace materials such as aluminium, where, as we all know, continuous maintenance is a necessary evil. In comparison, composite items require only minimal maintenance. Other significant advantages offered by pultruded products are that the composites can be moulded or shaped into lightweight components that have a complex geometry, are lightweight and highly flexible. 

Due to the minimal maintenance involved, their high durability and longer lifetime, there are a lot of savings to be made when using SP Tinby’s composite solutions. 

The advantages of using composite profiles are, among others:

  • High degree of stiffness and strength in relation to the density
  • Could replace other materials such as aluminium
  • Lightweight compared to materials with comparable attributes
  • Requires minimal maintenance
  • Durability and longer lifetime
  • Resist tough weather conditions such as heat, sun, moisture and cold
  • Poor carrier of cold, heat or electricity
  • Highly resistant to seawater and most chemicals

Pultrusion allows for a high level of design flexibility and can be used for e.g.:

  • Wind turbine items such as wing reinforcements, generator insulation, wing joints and cable conductors
  • Window and door profiles
  • Customized facades for houses and buildings
  • Landings, stairs, railings, structural items
  • Items for the navy industry (seawater resistant)
  • Environmental applications for handling of chemicals
  • Machine components and robots
  • Sports equipment like skis, snowboards and surfboards
SP Tinby and SP Group flagsRow of offshore wind turbines

Versatility is the key in our production halls

In addition to constantly developing pultrusion technology, SP Tinby also actively develops new products in collaboration with our clients. Therefore, we will be working closely with our clients at our Latvian plant to produce any type of profile they could possibly need, where a high degree of strength is required. 

This is particularly relevant in the wind energy sector which requires materials with long lifespans, and that are extremely strong, hard-wearing and resistant to the weather conditions. SP Tinby’s construction profiles fit the bill here, and live up to the stringent requirements that apply, making them the obvious choice for wind turbine elements for clients all over the world.

Why pultrusion at SP Tinby?

  • As your Danish partner, we will guide you safely through all phases of the development, start-up and production in Latvia.
  • We have extensive know-how, experience and expertise, when it comes to pultrusion, and we are constantly developing the technology.
  • We participate actively in developing new products in collaboration with our clients, and we also provide project management as a general part of our partnership.
  • We deliver reliable quality - on time.
  • We work globally.
  • We are flexible, and we adapt to our clients’ demands.
  • We offer customized solutions.
  • We are a solid company, supported by a strong group, SP Group A/S, and we have extensive expertise within the field of plastic manufacturing and finishing treatment.

Do you have an idea or a specific profile, which you would like to discuss and/or need assistance to produce?

Do not hesitate to contact our CEO, Michael Therkelsen, to make an appointment, and discuss how we may assist you in manufacturing your pultrusion profiles at our factory in Latvia. 

Michael V. Therkelsen

Tell us about your idea or component

Tell us what the part needs to do, how many you need and when. We can start with a sketch or drawing, or help clarify the next step if you do not have one yet.

Discuss your component